USAGE INFORMATION
Thermostat Setting
• The thermostat automatically regulates the inside temperature of the refrigerator
compartment. By rotating the knob from position « 1 » to « 6 », colder
temperatures can be obtained. (1 being low and 6 being high)
• « 0FF » position shows thermostat is closed and no cooling is available.
• For short-term storage of food in the refrigerator compartment, you can set the
knob between minimum and medium position.(1-4)
• For long-term storage of food in the refrigerator compartment, you can set knob to
medium position.(4-6)
• Note that: the ambient temperature, (the temperature of the freshly stored food
and how often the door is opened) affects the temperature in the refrigerator
compartment. If required, change the temperature setting.
• When you first switch on the appliance, for starting suitable cooling, the appliance
should work 24 hours continuously until it cools down to sufficient temperature.
• During this time do not open the door frequently or place a lot of food inside
the appliance.
• If the unit is switched off or unplugged, you must allow at least 5 minutes before
restarting or re-plugged the unit in order not to damage the compressor.
Your fridge is designed to operate in the ambient temperature intervals stated in
the associated standards, according to the climate class stated on the information
label. We do not recommend operating your fridge out of stated temperatures,
value limits in terms of cooling effectiveness.
Climate Class
N
ST
For Customer Services & Spare Parts please call 0345 208 8750 Opening times: Monday - Friday 8am –
6pm & Saturday 9am – 1pm or visit us at
www.productcareuk.com
7