10
Door Reversal
You will need to tilt the appliance backward to access the lower hinge which holds
screws. Do not tilt more than 45 degrees and do not lay the appliance flat on its
side.
For your own safety, a minimum of 2 people should lift or tilt this product.
Reversing the door:
1. Remove the screws holding the top cover in place at the rear of the unit. Gently
lift up the rear of the top cover and push it forward to remove it.
2. Remove the 3 screws from the top hinge, either with a cross headed
screwdriver or a spanner.
3. Support the door and gently remove the hinge and the door.
To Next Page
Loading...
