For Customer Services & Spare Parts please call 0345 208 8750
Opening times: Monday - Friday 8am – 6pm & Saturday 9am – 1pm
or visit us at www.productcareuk.com
54
All repairs to your machine should be carried out by a qualified engineer or contact Product
Care on 0345 208 8750.
AUTOMATIC FAULT WARNINGS AND WHAT TO BE DONE
FAULT POSSIBLE CAUSE WHAT TO DO
Water cut-off or low mains
water pressure.
• Water faucet may be closed. Check.
• Mains water may be cut-off.
Check.
• If so, switch the programme knob to
position 0. You can select a
programme and run your machine
after the mains water is supplied.
• Mains water pressure may be low.
Check.
• Water inlet hose may be twisted.
Check.
• Water inlet hose may be clogged.
• Clean water inlet hose filters. (*)
• Valve inlet filter may be clogged.
• Clean the valve inlet filters. (*)
turn off your tap and contact Customer
Services on
0345 208 8750
Pump is faulty or
pump filter is
clogged or electrical
connection of the pump
is faulty.
• Pump filter may be clogged. Clean the
pump filter. (**)
• Discharging hose may be clogged or
twisted. Check the discharging hose.
To Next Page
Loading...