ADJUSTING THE HANDLE BAR
• The handle bar can be turned 90° and 180°.
• Push down on the lock and turn the handle
bar until it locks in the chosen position.
• For vertical cutting/edge cutting.
ADJUSTING THE PLANT
PROTECTOR SPACER
• The plant protector spacer maintains
a gap between the trimmer head and
plants that are not to be cut.
• Press down on the plant protector
spacer.
• The plant protector spacer can be
raised into the parked position when
not in use.
Plant protector spacer,
up position
Plant
protector
spacer,
down
position
0
o
180
o
90
o
Lock
Handle
bar
Support
handle
Bolt
30
o
CUTTING GRASS
WARNING! Risk of personal injury!
• Do not cut wet or damp grass.
• Before starting the grass trimmer, check that the
trimmer disc is not in contact with stones, branches
or any other object.
• Start the grass trimmer before touching the grass
that is to be cut.
• Do not overload the trimmer.
• Avoid contact with obstacles (stones, walls, fencing etc.).
The trimmer disc and blade become worn very quickly.
• Sway the grass trimmer to the left and right. Work
slowly with the trimmer angled forwards at about 30°.
• Cut the grass gradually bit by bit from the top
downwards.
13
To Next Page
Loading...