CHARGING THE PUMP
AUTOMATIC STOP
The pump automatically shuts o when the built-in battery reaches 2.7 V to protect the battery.
NOTE! When this happens, do not restart the pump but continue charging it until it is fully charged.
1. Open the socket cover (4) by turning it
anticlockwise until it stops.
NOTE! The light is red during charging. Once the light turns blue, the product is fully charged.
A phone USB charger (approx. 2.5 h) A car USB socket (approx. 2.5 h)
A computer USB socket (approx. 5 h)
3. Connect the USB charging cable (15) to:
2. Connect the USB charging cable (15) to the
charging socket (3).
6
ENG
To Next Page
Loading...