Rvision SEE - Page 64

To Previous Page

SEE™ Operational Specifications

C-2 RVision P/N 660904-01 Rev 1

Housing Material Cast and Machined Aluminum

Camera specs

Optical Zoom 26X

Digital Zoom 12X

TV lines - NTSC/PAL 470/460

PEL count - NTSC/PAL 680,000/740,000

Light sensitivity 0.05 Lux (NIR mode)

Optional Illuminator 720nm, 35W, 50W, 100W

Main Page

Table of Contents3
Introduction9
Figure 1: SEE™ Camera with Quickconnect Mount/Cable10
Itar and Ear - Export Regulation Compliance10
About this Document10
Figure 2: Connecting the SEE™ to the SEE2PC Integration Tool11
Connecting the SEE™ Camera to a PC11
Figure 3: Quickconnect Mount Cable with a Thule Clamp12
Mounting the Quickconnect Mount/Cable to a Pole12
Mounting the Camera13
- Testing the Mount13
- Figure 4:Slide the Camera Foot into Mount Plates Shoe13
- Connecting the Hidef to Adapter to the SEE2PC14
- Integration Tool14
- Figure 5: Pull on the Eye Bolt to Insure Proper Mount14
- Figure 6: SEE2PC Integration Tool14
- Using the RS422 to RS232 Adapter15
Figure 7: RS422 to RS232 Adapter15
Figure 8: Serial Port Connection to a PC15
Connecting the RS-232 Connector to a PC15
- Figure 10: Connecting the Power Cable/Plug16
- Figure 9: SEE2PC Power Cable/Plug16
- Connectors17
- Figure 11: Connector17
- Run the Cables to Controller17
- Table 1: LOOK™ Connectors Functionality17
- Connecting Power to the LOOK™ Controller18
- Figure 12: Connect Power to LOOK™ Controller18
- Figure 13: Connect Power to the DC Adapter18
- Connect the Hidef Connector to LOOK19
- Connect the LOOK™ to Power Source19
- Figure 14: Hidef Connector19
- Attach Quickconnect to Breakout Adapter20
- Connect Adapter to PC20
- Figure 15 SEE2PC Camera Integration Tool20
- Install Psee20
- Running the Psee™ Application20
Connecting Power to the Camera16
Connecting to the LOOK™ Controller16
Connecting to Third Party Controllers21
Figure 17: File Download Dialog Box23
Controlling the SEE™ Camera with Psee™ Software23
Installing Psee™ Software23
Figure 18: Save as Dialog Box24
Figure 19: Psee.zip Zipped Format24
Figure 20: Psee™ Customer Information Dialog Box24
Figure 21: File Download-Security Warning Dialog Box25
Figure 22: Psee™ Program Dialog Box25
Figure 23: Customer Information Dialog Box26
Figure 24: Destination Folder Dialog Box26
Figure 25: Ready to Install Program Dialog Box27
Figure 26: Installation Progress Box27
Table 2 : Psee™ Tabbed28
Using the Rvision Psee™ Software28
Figure 27: Installshield Wizard Complete Dialog Box28
Starting the Psee™ Software29
- Figure 28: Psee™ Desktop Icon29
- Figure 29: Communication Tab Page29
- Psee™ Tabbed30
Figure 35: Changing Baud Rate38
Changing the Cameras Baud Rate38
Changing the Camera ID38
- Figure 36: Functional Elements of the LOOK39
- Joystick40
- Keypad40
- Table 10: Action on Joystick and Resulting Function40
- Table 9: LCD Status Information40
- Figure 37: LOOK™ Controller Keypad41
LOOK™ Single Mode Overview39
About this Document39
Liquid Crystal Display (LCD)39
LOOK™ Single Mode Operation43
Table 11: LOOK™ Single Mode Keypad Functions43
Connectors45
Connecting the LOOK45
- Connector Cables45
- Figure 38: Connectors45
- Table 12: LOOK™ Single Mode Connectors and Their Function45
- Table 13: Cables Connected to the LOOK45
- Figure 39: Cables Connected to the LOOK46
Appendix A - Setting up the SEE™ IP Camera47
Changing the Camera IP Address47
Figure 40: Control Panel47
Figure 41: Network Connections47
Figure 42: Connection Status48
Figure 43: Connection Properties48
Figure 44: Internet Protocol Properties48
Network Communications49
- Network49
- Sensor and Alarm49
System Connections49
- 1:1 Connection49
- 1:N Connection49
- Video Decoder49
- Figure 45: SEE™ IP Cable50
- Multicast Mode50
- Dns51
- Figure 46: Network Configuration51
- Local - IP Mode51
- Flow Control Mode52
- Multicast52
- Port52
Connect SEE™IP to LAN50
Connecting the RJ45 Connector to a PC50
Setting up the Network Configuration50
Serial Port Configuration - Unsupported52
Configuring the Video52
- Encode53
- Figure 47: Video Configuration53
- Motion Detection54
- Resolution54
- Video Options and Changing Event Actions54
- Audio Configuration54
IP Video - Logging in55
- Login ID and Password55
- Figure 48: IP Video Login55
- Table 14: SEE™IP Address, ID and Password55
Figure 49: Live View Video Image Feed56
Live View - Operations56
Figure 50: Setup Link in Live View57
Figure 51: First Window in Setup57
Setup - Configuration57
- Figure 52: System Configuration Screen58
- General Video Functions59
- Reboot and Reset59
  - Factory Reset Not Recommended59
- Time59
SEE™ IP Configuration58
System Configuration58
Appendix B - Warranty and Warnings61
Warranty and Warnings61
- Conditions of Warranty61
Rvision Limited Warranty and Limit of Liability62
Appendix C - Operational Specifications63

Rvision SEE - Page 64

Table of Contents