To Next PageTo Next Page
Need help?Do you have a question about the Ryobi CHI-1802 and is the answer not in the manual?
General| Voltage | 18V |
|---|---|
| Chuck Type | Keyless |
| No Load Speed | 0-440/0-1, 600 RPM |
| Chuck Size | 1/2 inch |
| Battery Type | Li-ion |
Keep work area clean and lit. Avoid explosive atmospheres. Keep children away.
Match plugs to outlets. Avoid body contact with earthed surfaces. Keep tools dry. Protect cords.
Stay alert, use common sense. Wear safety equipment. Avoid accidental starting. Do not overreach. Dress properly.
Use correct tool, ensure switch works, disconnect power, store properly, maintain tools.
Ensure switch off before inserting battery. Recharge with specified charger. Use correct battery packs. Handle battery leaks carefully.
Depress trigger to turn ON, release to turn OFF.
Lock trigger by placing rotation selector in center. Prevents accidental starting.
Switch between drill, drive, and impact modes for different applications.
Use chart to choose speed and mode based on application.
Tighten or release drill bits by rotating chuck jaws.
Lock trigger, open chuck jaws, insert bit, tighten chuck.
Lock trigger, open chuck jaws, remove bit.
Adjust torque ring to prevent damage to screws or workpiece.
Lock trigger in OFF position by placing rotation selector in center.
Switch between drill, drive, and impact modes for different applications.
Use chart to select correct speed and mode for application.
