Ryobi DBJ50 - User Manual

SAVE THIS MANUAL FOR FUTURE REFERENCE
OWNER'S OPERATING MANUAL
DETAIL BISCUIT JOINER / DBJ50
DOUBLE INSULATED
THANK YOU FOR BUYING A RYOBI DETAIL BISCUIT JOINER.
Your new detail biscuit joiner has been engineered and manufactured to Ryobi's high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire owner's manual before using your new detail biscuit joiner.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your detail biscuit joiner properly and
only for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi tools.
SPECIFICATIONS:
No Load Speed 19,000 rpm
Rating 120 volts, 60 Hz, AC
3.5 Amperes
Fence Angles 45° and 90°
Fence Height Adjustment
With Fence Angle Set on 90° 0 - 3/4 in.
With Fence Angle Set on 45° 5/16 in. - 13/16 in.
Depth Of Cut
With Micro Depth Of Cut Adjustment 0 - 9/32 in. (0 - 7 mm)
Net Weight 3.625 lbs (1.65 kg.)
1
2
1
2
3
3
0
5
16
3
4
45°
90°

Summary

RULES FOR SAFE OPERATION

SAFETY ALERT SYMBOLS

Explains the meaning of safety alert symbols and their importance.

DOUBLE INSULATION SAFETY

IMPORTANT SAFETY ADVICE

Highlights critical safety advice and servicing instructions.

READ ALL INSTRUCTIONS

ELECTRICAL SHOCK PREVENTION

Advises on preventing body contact with grounded surfaces to avoid shock.

PERSONAL PROTECTION EQUIPMENT

Details required safety gear like glasses, dust masks, and hearing protection.

EXTENSION CORD SAFETY

CONTINUED SAFETY INSTRUCTIONS

TOOL CORD INSPECTION

MAINTAINING CONTROL AND ALERTNESS

DAMAGED PARTS CHECK

Emphasizes checking for damaged parts and having them repaired by authorized centers.

HAZARDOUS ATMOSPHERE WARNING

Caution against using the tool in explosive environments due to sparking.

ADJUSTMENTS

DEPTH OF CUT ADJUSTMENTS

Details how to set the tool for three standard biscuit sizes.

FINE DEPTH ADJUSTMENTS

Explains how to make precise adjustments to the cutting depth.

FENCE ADJUSTMENTS

FENCE HEIGHT ADJUSTMENT

Guides on setting the fence height relative to the blade for cuts.

FENCE ROTATION; ANGLE ADJUSTMENT

Describes how to rotate the fence for 45 or 90 degree angle cuts.

OPERATION: EDGE-TO-EDGE JOINTS

CUTTING BISCUIT SLOTS

OPERATION: BUTT & OFFSET JOINTS

OPERATION: T- JOINTS

OPERATION: FLAT MITER JOINTS

OPERATION: EDGE MITER JOINTS

MAINTENANCE: BLADE REPLACEMENT

HOW TO REPLACE THE BLADE

Step-by-step instructions for safely replacing the biscuit joiner blade.

MAINTENANCE: BASE ASSEMBLY CLEANING

HOW TO CLEAN BASE ASSEMBLY

Detailed guide on cleaning internal parts to prevent clogging and ensure smooth operation.

TROUBLESHOOTING

BISCUIT FIT ISSUES

DUST CLOGGING

DIFFICULT BLADE MOVEMENT

POOR CUTTING PERFORMANCE

EXTENSION CORD CAUTION

Ryobi DBJ50 Specifications

General

Power Source	Corded Electric
No Load Speed	10, 000 RPM
Cutting Depth	0-1-3/8 inches
Weight	6.6 lbs
Dust Port	Yes
Blade Size	4 inches
Biscuit Size	0, 10, 20
Cord Length	6 feet
Dust Extraction	Yes
Amperage	5.5 Amp