Ryobi DUET FPR200 User Manual

how to get started
WARNING: This How To Get Started sheet is
not a substitute for reading the operator’s manual.
To reduce the risk of injury or property damage, user
must read and understand operator’s manual before
using this product.
Place plastic paint container lid onto the paint can.
Insert paint can into unit and lock handle closed.
Push dual control lever to the left to choose one person
operation.
Attach the paint tube to the quick-connect main outlet on unit.
Attach the other end of the paint tube to the quick connect outlet on
the handle.
Attach roller to handle.
Plug in the unit, place the forward/reverse switch in the forward
position.
Open the variable flow control valve, then squeeze and hold the
trigger on the roller handle to get paint flowing through the paint
tube.
Test the roller on a scrap surface before beginning.
Adjust the variable paint flow valve for desired paint coverage.
When finished, clean all parts before storing.
1
2
3
4
5
6
For detailed instructions on how to
perform any of the steps at right,
please see the operator’s manual.
7
8
3
5
6
9
For set-up when using two-person operation,
please see the operator’s manual.
10
7
10
8
2
4
9
1
REVERSE
FORWARD
988000-048
3-29-10 (REV:02)

Ryobi DUET FPR200 Specifications

General

Type	Airless Paint Sprayer
Battery Voltage	18 V
Nozzle Size	0.015 inches
Flow Rate	0.24 GPM
Hose Length	25 feet

Summary

How To Get Started

Place Paint Container Lid

Place the lid onto the plastic paint container before insertion into the unit.

Insert Paint Can and Lock

Insert the paint can into the unit and secure the handle in the closed position.

Select One-Person Operation

Push the dual control lever to the left to select one-person operation mode.

Connect Paint Tube to Unit

Attach the paint tube to the quick-connect main outlet on the unit.

Connect Paint Tube to Handle

Attach the other end of the paint tube to the quick-connect outlet on the handle.

Attach Roller to Handle

Securely attach the roller to the handle of the paint sprayer.

Plug In and Set Forward Switch

Plug in the unit and set the forward/reverse switch to the forward position.

Initiate Paint Flow

Open flow control, squeeze trigger on handle to start paint flow through the tube.

Test Roller Before Use

Test the roller on a scrap surface to ensure proper paint application before use.

Adjust Paint Flow Valve

Adjust the variable paint flow valve for the desired paint coverage.