Ryobi EBG3720 - Unpacking; Loose Parts List

Carefully remove all parts from the shipping carton.
Lift the bench grinder from the carton and place it on a
level work surface.
Do not discard the packing materials until you have
carefully inspected the machine, identified all loose parts,
and satifactorily operated your bench grinder.
Examine all parts to make sure no breakage or damage
has occurred during shipping.
If all parts have been included, proceed to assembly.
If any parts are damaged or missing, do not attempt to
plug in this tool or turn it on until the damaged or
missing parts are obtained and installed correctly.
Contact your nearest Ryobi dealer for assistance if an parts
are missing or damage.
UNPACKING
LOOSE PARTS LIST
WARNING:
If any parts are missing do not operate this machine
until the missing parts are replaced. Failure to do
so could result in possible serious injury.
Left Work Rest
LOOSE PARTS LIST - EBG2515
The following items are included with your Bench Grinder:
1
1
1
1
2
1
Right Work Rest
Plain Eyeshield
Magnifying Eyeshield
Eyshield Fixing Knob (M4x12)
Hex Socket Spanner S=4 (Blacked)
2
2
2
1
2
Eyeshield Assy. Mounting Bolt M6 x 30 (Zinc-Plated)
Eyeshield Assy. Mounting Washer D6 (Blacked)
Eyeshield Assy. Mounting Lock Washer D6 (Blacked)
Wheel Dresser w/ Handle
Eyeshield Mounting Rod - one left, one right 2
Adjustable Knob
2
Adjustable Knob
2
Washer (D5)
2
Washer (D5)
Left Work Rest 1
1
1
1
2
1
Right Work Rest
Plain Eyeshield
Magnifying Eyeshield
Eyshield Fixing Knob (M4x12)
Hex Socket Spanner S=4 (Blacked)
Eyeshield Mounting Rod - one left, one right
2
2
2
2
1
Eyeshield Assy. Mounting Bolt M6 x 30 (Zinc-Plated)
Eyeshield Assy. Mounting Washer D6 (Blacked)
Eyeshield Assy. Mounting Lock Washer D6 (Blacked)
Wheel Dresser w/ Handle
LOOSE PARTS LIST - EBG3720
The following items are included with your Bench Grinder:
Page 5