Ryobi BG612G - User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
6 in. BENCH GRINDER
MEULEUSE D’ÉTABLI
DE 152 mm (6 po)
ESMERILADORA DE BANCO
DE 152 mm (6 pulg.)
BG612/BG612G
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
TABLE OF CONTENTS
 General Safety Rules .......................2-3
 Specific Safety Rules ......................3-4
Symbols ..............................................5
Electrical ............................................. 6
Features ..............................................7
Assembly .........................................7-8
Operation .........................................8-9
Maintenance .....................................10
 Figures (Illustrations) ...................11-13
 Parts Ordering
and Service .........................Back page
TABLE DES MATIÈRES
 Règles de sécurité générales ..........2-3
 Règles de sécurité particulières ......3-4
Symboles ............................................5
Caractéristiques électriques ...............6
Caractéristiques .................................7
Assemblage .....................................7-8
Utilisation .........................................8-9
Entretien ...........................................10
 Figures (illustrations) ....................11-13
 Commande de pièces
et dépannage ....................Page arrière
ÍNDICE DE CONTENIDO
 Reglas de seguridad generales .......2-3
 Reglas de seguridad específicas ....3-4
Símbolos ............................................5
Aspectos eléctricos ............................ 6
Características ...................................7
Armado ............................................7-8
Funcionamiento ...............................8-9
Mantenimiento ..................................10
 Figuras (illustraciones) .................11-13
 Pedidos de piezas
y servicio ....................... Pág. posterior
SAVE THIS MANUAL FOR
FUTURE REFERENCE
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS

Summary

General Safety Rules

Personal Protection and Work Area Safety

Wear safety glasses, proper clothing, and maintain a clean, well-lit, and safe work area.

Safe Operation and Tool Handling

Follow safe practices for tool operation, securing work, and avoiding misuse.

Electrical and Extension Cord Safety

Ensure electrical safety by using proper cords and grounding methods.

Specific Safety Rules

Mounting and Securing

Firmly bolt the grinder to a workbench and always hold workpiece firmly against the work rest.

Wheel Guards and Inspection

Always use wheel guards, inspect grinding wheels for defects, and adjust work rest spacing.

Operational Precautions

Avoid awkward positions, do not cycle the switch rapidly, and never start the grinder with the wheel in contact.

Symbols and Signal Words

Signal Word Meanings

Defines DANGER, WARNING, CAUTION, and NOTICE signal words for hazard communication.

Product Symbol Explanations

Explains common symbols used on the product for safety and operation.

Electrical Connection and Wiring

Extension Cord Guidelines

Specifies requirements for extension cords, including gauge, length, and condition.

Power Supply Requirements

Details voltage, AC/DC compatibility, and speed specifications for tool operation.

Grounding Instructions

Provides instructions for proper grounding to reduce the risk of electric shock.

Product Features and Assembly

Product Specifications

Assembly Steps

Mounting and Operation

Mounting Grinder to Workbench

Basic Operation Warnings

Tool Applications and Basic Operation

Product Applications

Basic Grinding Techniques

Sharpening Specific Tools

Maintenance Procedures

Power Supply Cord Replacement

Wheel Replacement

Ryobi BG612G Specifications

General

Type	Bench Grinder
Wheel Diameter	6 in
Arbor Size	1/2 in
Power	710 W
Disc Diameter	115 mm