To Next PageTo Next Page
Need help?Do you have a question about the Ryobi BGH616 and is the answer not in the manual?
General| Type | Bench Grinder |
|---|---|
| Weight | 16.9 lbs. |
| Wheel Size | 6 inches |
| Speed | 3450 RPM |
| Arbor Size | 1/2 in. |
| Motor | Induction |
| No Load Speed | 3450 RPM |
| Disc Diameter | 6 inches |
| Spindle Thread | 1/2 in. |
Guidelines for selecting and using extension cords for power tools.
Connecting the tool to a power supply (120V, 60Hz AC).
Information on tool speed and electrical wiring considerations.
Explains the importance and procedure for grounding the tool.
Technical specifications for the BGH616 model.
Technical specifications for the BGH827 model.
Introduction to the grinder's parts and operation.
Description of the power switch for convenience and safety.
Information on the included coarse and fine grinding wheels.
Explanation of safety features for user protection.
Describes the work rest for stable support and drill bit grinding.
Details the integrated worklight that activates with the switch.
Explains the function of the wheel dressing tool.
Use of the coolant tray for cooling workpieces during grinding.
Instructions for unboxing and checking parts after shipping.
Steps to correctly install the safety shield assembly.
Steps to attach and adjust the work rest bracket and rest.
Instructions for securely mounting the bench grinder to a workbench.
Lists the intended uses for the bench grinder.
General guidance for efficient and safe operation.
How to use the built-in coolant tray for cooling.
Description of the power switch for convenience and safety.
Technique for sharpening drill bits using the grinder.
Process for sharpening lawn mower blades.
How to sharpen chisels and screwdrivers.
Advice on cleaning and maintaining the grinder's parts.
Step-by-step guide for replacing grinding wheels.
Information about the permanent lubrication of bearings.
Instructions for replacing the worklight bulb.
How to use the wheel dressing tool to renew sharpness.
Where to find and record model and serial numbers.
Information needed when ordering replacement parts.
