To Next PageTo Next Page
Need help?Do you have a question about the Ryobi BGH615 and is the answer not in the manual?
General| Type | Bench Grinder |
|---|---|
| No-Load Speed | 3, 450 RPM |
| Weight | 16.5 lbs |
| Wheel Diameter | 6 inches |
| Arbor Size | 1/2 inch |
| Motor | Induction |
| No Load Speed | 3450 RPM |
| Disc Diameter | 6 inches |
| Spindle Thread | 1/2 inch |
Maintain clean workspace, use correct tools, wear proper apparel, avoid hazards, keep children away.
Always wear safety glasses, hearing protection, and dust masks as needed.
Keep guards in place, remove keys, avoid accidental starts, never leave unattended.
Use proper extension cords, secure work, avoid overreaching, and be aware of wheel coasting.
Inspect for damage, secure mounting, proper wheel nut tightening, and wheel inspection.
Explains the meaning of Danger, Warning, Caution, and Note symbols.
Emphasizes reading manual, seeking professional service, and wearing safety glasses.
Guidelines for selecting and using appropriate extension cords based on length and gauge.
Connect to a 120V, 60Hz AC power supply; do not use DC.
Proper grounding reduces shock risk; ensure outlet and plug are compatible.
Carefully remove parts, inspect for damage, and contact support if needed.
Lists all components included with the BGH615 model.
Lists all components included with the BGH625 model.
Lists all components included with the BGH825 model.
Lists tools required for assembly and alignment, such as wrenches and screwdrivers.
Details switch, motor, wheels, shields, and work rests.
Equipped with a permanently mounted worklight for better illumination.
Details switch, motor, wheels, shields, work rest, and coolant tray.
Features an auto-on worklight and a wheel dressing tool for maintenance.
Details switch, motor, wheels, shields, and work rest.
Features an auto-on worklight and a coolant tray for efficient operation.
Attaching spark deflectors to wheel guards for BGH615 and BGH625/BGH825.
Warnings about deflector clearance and secure tool mounting.
Assembling shield brackets and mounting safety shields.
Never operate without safety shields and spark deflectors properly installed.
Mounting work rests for BGH615, BGH625, and BGH825 models, adjusting gap.
Keep tools sharp, ideal uses, and general sharpening techniques.
Guidance for sharpening twist drill bits and lawn mower blades.
Excessive pressure on a cold wheel can cause it to crack.
Proper technique for sharpening chisels and screwdrivers using the work rest.
Detailed procedure for removing and installing grinding wheels safely.
Keeping the grinder clean and checking fasteners for tightness.
Using correct cords and performing regular safety checks.
Instructions for replacing worklight bulbs on different models.
How to use a wheel dresser to maintain wheel sharpness and integrity.
Reiterates cautions for using extension cords with power tools.
Contacting Ryobi Authorized Service Center for repairs and parts.
Location for noting model and serial numbers for service.
