Ryobi ETS-1526AL - User Manual

ETS-1526AL
TABLE SAW
OWNER’S OPERATION MANUAL
CAUTION: Carefully read through this entire owner's manual before using your
TABLE SAW.
SAVE THIS MANUAL FOR FUTURE REFERENCE.
Your new table saw has been engineered and manufactured to Ryobi's high standard for
dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged,
trouble free performance.
THANK YOU FOR BUYING A RYOBI TABLE SAW
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions.
If you use your saw properly and only for what it is intended, you will enjoy years of safe, reliable
service.
Thank You again for buying Ryobi tools.
N197

Summary

General Safety Precautions

Safe Tool Operation Practices

Additional Safety Precautions for Table Saw

Operating Procedures and Guards

Restrictions of Use

Prohibited Cutting Operations

Lists materials and cutting types that should not be performed with this saw.

Machine Modification and Usage Rules

Outlines forbidden modifications, guard usage, and other operational restrictions.

Mounting the Elevating and Lowering Handle and the Tilting Handle (Fig. 1)

Mount the Blade (Fig. 1, 2&3)

Mount the Riving Knife (Fig. 4&5)

Mount the Rip Fence (Fig. 6&7)

Adjustment of Saw Blade (Fig. 8, 9&10)

Operation On;Off Magnetic Switch (Fig. 11)

Overload Reset Button (Fig. 11)

Using Rip Fence (Fig. 19&20)

Maintenance

Mount the Table Saw to the Stand (Fig. 22&23)

Ryobi ETS-1526AL Specifications

General

Blade Diameter	254 mm
Power	1500 W
No Load Speed	4500 RPM
Bevel Capacity	45°
Max. Cutting Depth at 90°	80 mm
Max. Cutting Depth at 45°	55 mm
Power Source	Corded