To Next PageTo Next Page
Need help?Do you have a question about the Ryobi ETS-1825 and is the answer not in the manual?
General| Type | Table Saw |
|---|---|
| Power Source | Corded Electric |
| Motor Power | 1800W |
| Voltage | 230V |
| Blade Diameter | 254 mm |
| No Load Speed | 4500 RPM |
| Max Cutting Depth at 90° | 80 mm |
| Max Cutting Depth at 45° | 55 mm |
| Blade Tilt Range | 0 - 45 ° |
General safety rules for operating power tools and this machine.
Additional safety precautions specific to operating the circular saw bench.
Instructions for assembling casters, bumpers, and out feed support.
Guides for installing the rip fence, leg stand, and auxiliary fence.
Guidance on how to safely connect the saw to the power supply.
How to start, stop, raise, lower, and bevel the saw blade.
Adjusting miter gauge, positive stops, blade removal, and guard assembly.
How to set the scale, align the blade, and use outfeed/sliding extensions.
Procedures for performing cross-cutting and ripping operations.
Using a push stick and how to transport the machine.
Routine checks, cleaning, and lubrication procedures.
Rip fence alignment check and information regarding noise levels.
