Ryobi LLCDI1802 - Operation and Usage Guide

3
English
 Risk of electrocution if electric cables are drilled into.
Always grasp the product by designated handles; do
not touch the drill bits.
 Injury caused by vibration. Hold the product by
designated handles and limit exposure to vibration.
See “RISK REDUCTION”.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
QXPEQHVVDQGEODQFKLQJRIWKH¿QJHUVXVXDOO\DSSDUHQW
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
 Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
 After each period of operation, exercise to increase
blood circulation.
 Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused, or aggravated, by prolonged
use of a tool. When using any tool for prolonged
periods, ensure you take regular breaks.
SPECIFICATIONS
18 Volt compact hammer drill driver
Model LLCDI1802
Voltage 18 V
Chuck 2-13 mm
Switch Variable speed
No load speed (Drill mode):
Lo speed 0-400 min
-1
Hi speed 0-1550 min
-1
Hammer speed (Blows per minute):
Lo speed 0-5200 min
-1
Hi speed 0-20150 min
-1
Max. torque (ISO 5393) 50 Nm
Weight (not incl. battery pack) 1.38 Kg
Measured sound values determined according to EN 60745:
A-weighted Sound pressure level L
pA
= 88.5 dB(A)
Uncertainty K 3 dB
A-weighted Sound power level L
WA
= 99.5 dB(A)
Uncertainty K 3 dB
Wear ear protectors.
Weighted root mean
The vibration total values (triaxial vector sum)
determined according to EN 60745:
Vibration emission value
Drilling in metal a
h
,D
= 1.4 m/s
2
Uncertainty K 1.5 m/s²
Impact drilling into concrete a
h,ID
= 15.0 m/s²
Uncertainty K 1.5 m/s²
Screwdriving without impact a
h
= 0.7 m/s²
Uncertainty K 1.5 m/s²
MODEL
COMPATIBLE
BATTERY
PACK
COMPATIBLE
CHARGER
Lithium-ion
RB18L13
RB18L15
RB18L20
RB18L25
RB18L40
RB18L50
BCS618
BCL14181H
BCL14183H
RC18150
RC18627
RC18120
OPERATION
WARNING
Do not allow familiarity with products to make you
careless. Remember that a careless fraction of a
VHFRQGLVVXI¿FLHQWWRLQÀLFWVHULRXVLQMXU\
WARNING
Always wear safety goggles or safety glasses with side
shields when operating products. Failure to do so could
result in objects being thrown into your eyes, resulting
in possible serious injury.
WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product. The
use of attachments or accessories not recommended
can result in serious personal injury.