11
2. Push the lock-out safety trigger and squeeze
the operating trigger to operate the product.
NOTE: Press the lock-out safety trigger and
the operating trigger to release approximately
3.5 mm of the cutting line. To extend the line
further, wait until the motor stops and press
both triggers again until the line reaches the full
cutting capacity. No further trimming line is to be
released while the motor is still running.
NOTE: The small blade fitted to the cutting
attachment guard is designed to trim the newly
extended line to the correct length for safe
and optimum performance. The blade is very
sharp. Do not touch the blade, particularly when
cleaning the product.
NOTE: For best cutting, advance the cutting line
until it is trimmed to length by the cut-off blade.
2
1
1 2
3
2
To Next Page
Loading...
