8
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Chuck ............................................................................................................................................................................1/2 in.
Motor......................................................................................................................................................................18 Volt DC
Switch..............................................................................................................................................................Variable Speed
Gear Box ...................................................................................................................................................................3-Speed
No Load Speed .......................................................................... Lo (0 - 370/min.), Hi (0-750/min.), Super-Hi (0 - 2200/min.)
Hammer Speed ......................................................... Lo (0 - 5,920 BPM*), Hi (0-12,000 BPM*), Super Hi (0 - 35,200 BPM*)
Charger Input
....................................................................................................................................... 120 V, 60 Hz, AC only
Charge Rate
.................................................................................................................................................................1 Hour
Torque
...................................................................................................................................................... Maximum 480 in.lb.
* Blows Per Minute
TRIGGER
SWITCH
THREE SPEED
GEAR TRAIN (SUPER HIGH-HIGH-LOW)
DIRECTION OF
ROTATION SELECTOR
(FORWARD/CENTER LOCK/REVERSE)
KEYLESS CHUCK
BIT
STORAGE
AREA
MODE SELECTOR TORQUE
ADJUSTMENT RING
AUXILIARY
HANDLE
DEPTH
GAUGE ROD
To Next Page
Loading...
