Ryobi P290 User Manual

OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
18 VOLT QUIETSTRIKE
™
PULSE DRIVER
CLÉ À IMPULSION QUIETSTRIKE
™
18 V
DESTORNILLADOR DE IMPULSO
QUIETSTRIKE
™
DE 18 V
P290
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT : Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
 General Power Tool Safety Warnings
........................................................2-3
 Impact Driver Safety Warnings ..........3
Symbols .............................................4
Features .............................................5
 Assembly ...........................................5
 Operation ........................................5-7
 Maintenance ......................................8
 Illustrations .........................................9
 Parts Ordering and Service
............................................Back page
TABLE DES MATIÈRES
****************
 Avertissements de sécurité générales
relatives aux outils électriques ........2-3
 Avertissements de sécurité relatifs
clé à chocs ......................................... 3
Symboles ...........................................4
Caractéristiques ................................. 4
 Assemblage .......................................5
 Utilisation .......................................5-6
 Entretien ............................................. 8
 Illustrations .........................................9
 Commande de pièces et dépannage
......................................... Page arrière
ÍNDICE DE CONTENIDO
****************
 Advertencias de seguridad para
herramientas eléctrica ................... 2-3
 Advertencias de seguridad para
destornillador de impacto ..................3
Símbolos ............................................4
Características ...................................5
 Armado ..............................................5
 Funcionamiento ............................. 5-6
 Mantenimiento ...................................8
 Illustraciones ......................................9
 Pedidos de piezas y servicio
......................................Pág. posterior

Ryobi P290 Specifications

General

Brand	Ryobi
Model	P290
Category	Impact Driver
Language	English

Summary

General Power Tool Safety Warnings

Impact Driver Safety Warnings

Symbols

Features

Product Specifications

Details technical specifications like coupler type, no-load speed, and impacts per minute.

Operation

Variable Speed Switch Trigger

Explains how to control tool speed using the variable speed switch trigger for higher or lower speed.

Direction of Rotation Selector

Details how to set the rotation direction (forward, reverse, lock) for safe operation and to prevent accidental starts.

Belt Clip Installation and Removal

Instructions for attaching or detaching the belt clip to the tool housing on either side.

Battery Pack Installation and Removal

Guidance on securely inserting and removing the battery pack from the tool, ensuring latches snap.

Bit Installation and Removal

Steps for inserting and ejecting bits using the auto-load chuck mechanism for 1/4 in. hex bits.

Driving and Removing Screws

Procedure for driving screws, including safety warnings about hidden wiring and trigger control.