Ryobi P300 User Manual

OPERATOR’S MANUAL
18 VOLT CORDLESS
NAILER/STAPLER
P300
SAVE THIS MANUAL FOR FUTURE REFERENCE
Your nailer/stapler has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. When properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using
this product.
Thank you for buying a Ryobi product.
BATTERIES AND CHARGERS
SOLD SEPARATELY

Ryobi P300 Specifications

General

Type	Brad Nailer
Depth Adjustment	Yes
LED Light	Yes
Firing Mode	Sequential
Battery	18V
Nail Size	18-gauge
Nail Length	5/8 inch to 2 inch
Tool Length	12.5 inches
Magazine Capacity	105 nails

Summary

General Safety Rules

Specific Safety Rules

Safety Rules for Charger

Service

Assembly

Operation

Charging a Cool Battery Pack

How to charge a battery pack that is within normal temperature range.

Charging the Battery Pack

Step-by-step guide to charging the battery pack.

Charging a Hot Battery Pack

Procedure for charging a battery pack that has become hot from use.

To Install Battery Pack

To Remove Battery Pack

Loading the Tool with Staples

Loading the Tool with Brads

Setting Depth

Nailing or Stapling

Step-by-step guide on how to operate the tool for nailing or stapling.

Removing a Jammed Brad/Staple

Procedure for clearing jams from the tool's mechanism.

Maintenance

Batteries