8
FEATURES
Fig. 1
PRODUCT SPECIFICATIONS
Buffing Pad Size ........................................................... 6 in.
Orbit Diameter
...........................................................
3/8 in.
Motor .................................................................. 18 Volt DC
No Load Speed ..................................... 4,000 r/min. (RPM)
Charger Input ................................... 120 V, 60 Hz, AC only
Charge Rate ..............................................................1 hour
KNOW YOUR BUFFER/POLISHER
See Figure 1.
The safe use of this product requires an understanding of
the information on the tool and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
APPLICATION BONNET
The reusable application bonnet is made of 100% terry cloth
and is used to apply polish to the painted surface.
BUFFING/POLISHING BONNET
The reusable buffing/polishing bonnet is made of synthetic
tufted material and is used to buff and polish painted sur-
faces.
HANDLE
The handle stabilizes your buffer/polisher and is used during
all operations.
ROTATING BASE
The buffer/polisher comes with a rotating base that moves
in random orbital motion.
HANDLE
BUFFING/POLISHING BONNET
ROTATING BASE
APPLICATION BONNET
To Next Page
Loading...
Need help?
General
