To Next PageTo Next Page
Need help?Do you have a question about the Ryobi P737D and is the answer not in the manual?
General| Auto Shutoff | Yes |
|---|---|
| Type | Digital Inflator |
| Units of Measurement | PSI, kPa, Bar |
| Battery | 18V |
| Display | Digital |
| Power Source | Battery |
| Chuck Type | Thread-on |
| Inflator Type | Digital |
Keep work area clean, well-lit, and free from distractions for safe operation.
Avoid water and liquids; use only specified batteries and chargers to prevent shock.
Stay alert, dress appropriately, maintain balance, and wear eye protection.
Keep unit clean, do not exceed pressure ratings, protect lines from damage.
Ensure service by qualified personnel using identical parts to maintain safety.
Read manual, know hazards, avoid bursting, protect from rain, inspect unit for defects.
Ensure hose is free, use as intended, be aware of misuse risks, do not leave unattended.
Check for alignment, binding, breakage; repair damaged guards by authorized center.
Monitor inflation, avoid over-inflation, never leave unattended, do not use damaged battery packs.
Explains DANGER, WARNING, CAUTION, NOTICE for risk association.
Explains symbols for safety alerts, manual, eye protection, wet conditions, hot surface, bursting risk, and recycling.
Details hose length, maximum pressure, duty cycle, and gauge type.
Do not use if not fully assembled or with missing/damaged parts to avoid injury.
Do not modify product or create unrecommended accessories; it's misuse and hazardous.
Avoid carelessness, wear eye protection, use recommended accessories, do not leave items unattended.
Suitable for inflating tires; not for commercial use.
Remove battery when assembling, adjusting, cleaning, or storing to prevent accidental starts.
Instructions for attaching air chuck, using trigger, and understanding gauge readings.
Explains how to turn on the gauge and its auto-shutoff feature.
Describes tapered adaptor and sport ball needle for various inflation tasks.
Proper insertion and removal of the needle; note on low pressure readings.
Steps for using the adaptor with Presta valves for proper inflation.
Use only identical replacement parts to avoid hazards or damage.
Clean with cloth, avoid solvents and chemicals that damage plastic.
