Need help?Do you have a question about the Ryobi RLM30 and is the answer not in the manual?
General| Brand | Ryobi |
|---|---|
| Model | RLM30 |
| Category | Measuring Instruments |
| Language | English |
Guidelines for safe operation of the laser distance measurer, covering laser radiation, handling, and environmental conditions.
Instructions for battery replacement, removal, and maintenance to ensure reliable tool operation and safety.
Specifies the intended applications for the laser distance measurer, including measuring distances, lengths, heights, areas, and volumes.
Highlights potential residual risks, particularly severe eye injury from laser beam exposure to persons or animals.
Step-by-step guide on how to open the battery cover and insert batteries correctly into the compartment.
Procedure for powering on the laser distance measurer by pressing and holding the ON/OFF button until the standby screen appears.
Instructions on how to perform a single measurement, including pointing the laser and confirming the reading with a beep.
Steps to add multiple measurements together, displaying the cumulative sum on the screen.
Procedure for subtracting measurements, showing the difference between consecutive readings.
Guide to activating continuous measurement mode, displaying maximum and minimum values, and pausing/resuming.
Explains using the Pythagorean theorem to calculate vertical distances by measuring oblique and horizontal distances.
Steps to calculate the area by taking two sequential measurements and displaying the result.
Instructions for calculating volume by taking three sequential measurements (length, width, height).
To Next Page
