Ryobi RLM30 - Indirect Measurement; Area Measurement; Volume Measurement

Safety
5
the Pythagorean theorem to calculate
vertical distances that are difficult to
access.
1. Press to activate indirect
measurement. is displayed.
2. Press to take the measurement of
the oblique distance.
3. Press to take the measurement of
the horizontal distance.
NOTE: Press to clear the
measurement taken.
The vertical distance (height) will
be calculated and the result will be
displayed.
Area measurement
See page 11.
1. Press to activate area measurement.
2. Press to take the first measurement.
3. Press to take the second
measurement.
NOTE: Press to clear the
measurement taken.
After the second measurement is
complete, the area will be calculated and
the result will be displayed.
Volume measurement
See page 12.
1. Press twice to activate volume
measurement.
2. Press to take the first measurement.
3. Press to take the second
measurement.
4. Press to take the third
measurement.
NOTE: Press to clear the
measurement taken.
After the third measurement is complete,
the volume will be calculated and the
result will be displayed.
ENVIRONMENTAL PROTECTION
Recycle raw materials
instead of disposing of
as waste. The machine,
accessories and packaging
should be sorted for
environmental-friendly
recycling.
SYMBOLS
Safety alert
Please read the
instructions carefully
before starting the
machine.
C-Tick compliance
mark. Product
meets applicable
EMC regulatory
requirements.
Direct current
Class 2 laser beam.
Do not stare into the
laser beam.
Waste electrical
products should not
be disposed of with
household waste.
Please recycle
where facilities exist.
Check with your local
authority or retailer
for recycling advice.