EasyManua.ls Logo

Ryobi PCL28 - User Manual

Ryobi PCL28
6 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATOR’S MANUAL
MANUEL D’UTILISATION
MANUAL DEL OPERADOR
ONE+ 18V MULTI-SIZE RATCHET
CLIQUET À TAILLES MULTIPLES DE
18 V ONE+
LLAVE DE TRINQUETE MULTITAMAÑO
ONE+ 18V
PCL280
WARNING: To reduce the
risk of injury, the user must read and
understand the operator’s manual
before using this product.
SAVE THIS MANUAL FOR
FUTURE REFERENCE
ADVERTENCIA: Para reducir
el riesgo de lesiones, el usuario debe leer
y comprender el manual del operador
antes de usar este producto.
AVERTISSEMENT :
Pour
réduire les risques de blessures,
l’utilisateur doit lire et veiller à bien
comprendre le manuel d’utilisation avant
d’employer ce produit.
GUARDE ESTE MANUAL
PARA FUTURAS CONSULTAS
CONSERVER CE MANUEL
POUR FUTURE RÉFÉRENCE
TABLE OF CONTENTS
****************
General Power Tool
Safety Warnings ............................. 2-3
Ratchet Safety Warnings ...................3
Symbols .............................................4
Assembly ...........................................5
Operation ....................................... 5-6
Maintenance ......................................7
Illustrations ..................................... 8-9
Parts Ordering
and Service .........................Back page
TABLE DES MATIÈRES
****************
Avertissements de sécurité générales
relatives aux outils électriques ....... 2-3
Avertissements de sécurité
relatifs au cliquet ................................ 3
Symboles ...........................................4
Assemblage .......................................5
Utilisation ...................................... 5-6
Entretien ............................................. 7
Illustrations ..................................... 8-9
Commande de pièces
et dépannage ................... Page arrière
ÍNDICE DE CONTENIDO
****************
Advertencias de seguridad para
herramientas eléctricas ................. 2-3
Advertencias de seguridad
sobre la trinquete .............................. 3
Símbolos ........................................... 4
Armado ............................................. 5
Funcionamiento ............................. 5-6
Mantenimiento .................................. 7
Illustraciones .................................. 8-9
Pedidos de piezas
y servicio .......................Pág. posterior
INCLUDES: Ratchet, 3/8 in. and ¼ in.
Double-Sided Anvil (1), 1/2 in. Anvil with
¼ in. Hex (1), Operator’s Manual
INCLUT : Cliquet, enclume à double face
de 9,53 mm et 6,35 mm (1), enclume de
13 mm avec prise hexagonale de 6,35
mm(1), manuel d’utilisation
INCLUYE: Trinquete, yunque de doble
cara de 9,53 mm (3/8 in) y 6,35 mm (¼
in) (1), yunque de 13 mm (1/2 in) con
hexágono de 6,35 mm (¼ in) (1) manual
del operator
Question and Answer IconNeed help?

Do you have a question about the Ryobi PCL28 and is the answer not in the manual?

Overview

This document is an operator's manual for the RYOBI ONE+ 18V Multi-Size Ratchet (PCL280). It provides instructions for safe operation, assembly, usage, and maintenance of the tool.

Function Description:

The RYOBI ONE+ 18V Multi-Size Ratchet is a cordless power tool designed for removing and installing threaded fasteners. It is intended to speed up the installation and removal process of nuts and bolts, but it is not designed to replace a torque wrench or breaker bar for applications where precise torque is critical. The tool features a multi-size ratchet head that can be rotated to various positions and accepts different anvil sizes to accommodate a range of sockets. It is part of the RYOBI ONE+ 18V system, utilizing lithium-ion (Li-ion) battery packs.

Important Technical Specifications:

  • Power Source: 18V ONE+ Lithium-ion battery pack.
  • Anvil Sizes: Includes a 3/8 in. and 1/4 in. double-sided anvil, and a 1/2 in. anvil with a 1/4 in. hex. This allows for compatibility with various socket sizes.
  • Ratchet Head Rotation: The head can be set to 0°, 90°, 180°, and 270° for versatile access in different work areas. A spring-loaded collar ensures the head snaps into place in these indexed positions.
  • Speed Control: Features a variable speed switch trigger, allowing the user to control the rotational speed based on trigger pressure.
  • LED Lights: Equipped with LED lights near the collar that illuminate when the switch trigger is depressed, providing visibility in dimly lit work areas. These lights only function with a charged battery pack.
  • Overload Protection: The Li-ion battery pack automatically shuts off the tool if it is forced or overloaded. To reset, release the trigger and resume operation; if it still doesn't work, remove and reinsert the battery.
  • High Temperature Protection: The tool's Li-ion battery packs have a high-temperature protection feature that deactivates the tool if the motor overheats. To resume operation, the tool must be allowed to cool before squeezing the trigger again.

Usage Features:

  • Cordless Operation: Being part of the ONE+ 18V system, it offers the convenience of cordless operation, allowing for greater mobility and use in locations without immediate access to electrical outlets.
  • Multi-Size Anvils: The inclusion of different anvil sizes (3/8 in., 1/4 in., 1/2 in.) and a 1/4 in. hex allows for adaptability with a wide range of sockets and fasteners. Anvils are installed by holding the anvil lock down and inserting the anvil fully into the ratchet head until the collar groove engages. Removal is the reverse process.
  • Rotatable Ratchet Head: The ability to rotate the ratchet head to four different indexed positions (0°, 90°, 180°, 270°) provides flexibility for accessing fasteners in tight or awkward spaces.
  • Lockout Lever: A lockout lever is located on the handle above the switch trigger. It must be in the unlocked position to operate the tool and should be slid down to the locked position when not in use or when carrying the tool to prevent accidental starting.
  • Forward/Reverse Dial: A dial on the back of the ratchet head allows the user to select the desired rotation direction (forward or reverse) for the socket. The arrow on the dial indicates the direction the anvil will spin.
  • Belt Clip (Not Included): The manual mentions that a belt clip (not included) can be installed on either side of the tool for convenient carrying.
  • Safety Warnings: Emphasizes the importance of holding the tool by insulated gripping surfaces when working near hidden wiring to prevent electric shock. It also warns against using the tool as a drill and stresses the need to verify proper torque with a torque wrench for critical applications.

Maintenance Features:

  • General Power Tool Maintenance: Users are advised to maintain power tools and accessories by checking for misalignment, binding of moving parts, breakage, or any other condition that might affect operation. Damaged tools should be repaired before use.
  • Battery Pack Care: Instructions include recharging only with the specified charger, using only designated battery packs, and keeping battery packs away from other metal objects to prevent shorting. Users are warned not to expose battery packs to fire or excessive temperatures (above 265° F / 129° C) and to follow charging instructions within specified temperature ranges. Damaged or modified battery packs should not be used and should be disposed of properly.
  • Service: Power tools should be serviced by qualified repair personnel using identical replacement parts to ensure safety. Damaged battery packs should only be serviced by the manufacturer or authorized service providers.
  • Cleaning: Handles and grasping surfaces should be kept dry, clean, and free from oil and grease to ensure safe handling and control.
  • Eye and Hearing Protection: Always wear eye protection with side shields (complying with ANSI Z87.1) and hearing protection during extended periods of operation.
  • Dust Mask: Wear a face or dust mask if the operation is dusty to protect lungs.
  • Manual Reference: The manual frequently instructs users to refer to it for specific procedures, safety warnings, and troubleshooting, highlighting its role as a primary maintenance and operational guide.

Ryobi PCL28 Specifications

General IconGeneral
BrandRyobi
ModelPCL28
CategoryPower Tool
LanguageEnglish

Related product manuals