Ryobi R18CPS - PRODUCT SPECIFICATIONS; WARNING!; BATTERY AND CHARGER

PRODUCT SPECIFICATIONS
Compact power scrubber
Model R18CPS
Voltage 18 V
No-load speed 210 RPM
Waterproof rating IPX7
Brush head diameter 15cm
Weight
(According to EPTA procedure 01/2014)
1.7 kg (1.3Ah) -
2.0 kg (5.0Ah)
Weight - not incl. battery pack 1.2 kg
Measured sound values determined according to EN 62841:
A-weighted sound pressure level L
p
= 58.0 dB(A)
Uncertainty K 3 dB(A)
A-weighted sound power level L
W
= 69.0 dB(A)
Uncertainty K 3 dB(A)
Wear ear protectors.
The vibration total values (triaxial vector sum) determined
according to EN 62841:
Vibration emission value a
h
= 0.6 m/s
2
Uncertainty K 1.5 m/s
2
Replacement parts
15 cm Soft bristle nylon brush 315967001
15 cm Medium bristle nylon brush 315865001
15 cm Hard bristle nylon brush 315968001
15 cm Foam head 315865002
BATTERY AND CHARGER
Model
Compatible battery
pack (not included)
Compatible charger
(not included)
Lithium-Ion RB18L13 – RB18L50A
BCS618G
BCL1418IV*
BCL1418..H
RC18..
* for vehicles with 12V DC outlets
WARNING! The declared vibration total values and
the declared noise emission values given in this instruction
manual have been measured in accordance with a
standardised test and may be used to compare one tool with
another. They may be used for a preliminary assessment of
exposure.
The declared vibration and noise emission values represent
the main applications of the tool. However, if the tool is used
for different applications, used with different accessories,
or poorly maintained, the vibration and noise emission
may differ. These conditions may signicantly increase the
exposure levels over the total working period.
An estimation of the level of exposure to vibration and noise
should take into account the times when the tool is turned off
or when it is running idle. These conditions may signicantly
reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and noise, such as maintaining
the tool and the accessories, keeping the hands warm (in
case of vibration), and organising work patterns.