Need help?Do you have a question about the Ryobi R18DA and is the answer not in the manual?
General| Brand | Ryobi |
|---|---|
| Model | R18DA |
| Category | Lawn and Garden Equipment |
| Language | English |
Keep work area clean and well lit, avoid explosive atmospheres, keep bystanders away.
Match plugs to outlets, avoid earthed surfaces, keep away from rain/wet conditions, do not abuse cord.
Stay alert, use PPE, prevent unintentional starting, don't overreach, dress properly.
Do not force tool, repair if switch faulty, disconnect before adjustments, store idle tools securely.
Recharge with specified charger, use designated battery packs, keep battery away from metal objects.
Have tool serviced by qualified person using identical parts for maintained safety.
Always wear safety goggles or eye protection with side shields marked to comply with AS/NZS 1337.
Position auger within 100mm of drain to prevent cable twisting or binding.
Avoid running tool in reverse for extended periods to prevent cable damage.
Never place hand near rotating drum or cable to reduce risk of serious personal injury.
Wear protective clothing, eye protection, and gloves due to potentially harmful drain substances.
Remove cable slowly to avoid splash back; use warm, soapy water to clean hands.
Battery tools are always in operating condition; be aware of hazards when not in use.
Do not place battery tools or batteries near fire or heat to reduce explosion risk.
Do not crush, drop, or damage battery packs as damaged batteries can explode.
Batteries can explode near ignition sources; never use cordless products near open flame.
Do not charge battery tool in damp or wet locations to reduce electric shock risk.
Charge battery tool in temperatures between 10°C and 38°C to reduce injury risk.
Wash skin immediately if battery liquid contacts; flush eyes with water and seek medical help.
Do not use product if not completely assembled or if parts are missing/damaged.
Do not modify product or create unrecommended accessories; misuse can lead to injury.
Do not let familiarity lead to carelessness; a fraction of a second can cause serious injury.
Remove battery pack when assembling, cleaning, or not in use to prevent accidental starting.
Always wear eye protection with side shields to prevent eye injuries.
Do not use unrecommended attachments or accessories as it can result in serious personal injury.
Step-by-step instructions for correctly installing and removing the battery pack.
Controls tool speed based on trigger pressure for variable operation.
Selects forward, reverse, or center lock position for cable direction control.
Allows user to advance cable using switch trigger without holding the pommel.
Instructions for manually and switch-trigger advancing and retracting the cable.
Hold auger within 101.6mm of drain, manually feed cable into pipe slowly.
After initial feed, use switch trigger to advance cable or continue manual advancement.
Cable should advance freely until it contacts obstruction or is caught in a P-trap.
Additional force or trigger pressure may be needed for P-trap obstructions.
Bore into obstruction with cable or wrap obstruction around cable for removal.
Flush toilet or run water to confirm drain is clear after obstruction removal.
Place the cap on the end of the cable after cleaning.
Remove battery, hold tool at an angle, and lift drain tab to allow liquids to pour out.
Clean cable with soapy water as it advances and retracts; dry with a clean cloth.
Remove battery pack and disconnect power for assembly, cleaning, or storage.
Avoid solvents for cleaning plastic parts as they can cause damage; use dry cloths.
Keep petroleum products away from plastic parts as they can damage them.
Use only original manufacturer's replacement parts for servicing to ensure safety.
Always wear safety goggles or glasses with side shields during maintenance operations.
For greater safety and reliability, all repairs should be done by an authorized service center.
To Next Page
