Ryobi R18MF - Troubleshooting; Product Specifications; Battery and Charger

Techtronic Industries (Australia) Pty. Ltd.
Level 1, 660 Doncaster Road
Doncaster, VIC 3108, Australia
Techtronic Industries New Zealand Ltd.
18-26 Amelia Earhart Avenue
Mangere, Auckland 2022, New Zealand
PRODUCT SPECIFICATIONS
Voltage 18 V
Fan speed 1400 / 2200 min
-1
Weight 2.53 kg
Bucket diameter 290 - 304 mm
Max hose water pressure
- in PSI 75 PSI
- in kPa 500 kPa
- in bar 5 bar
Pump speed 5400 min
-1
Water flow 5.1 LPH
Air velocity 390 m/min
BATTERY AND CHARGER
Model Compatible battery pack
(not included)
Compatible charger
(not included)
Lithium-Ion RB18L13
RB18L15
RB18L25
RB18L26
RB18L40
BCS618G
BCL14181H
BCL14183H
BCL1418IV*
Nickel
Cadmium
RB18N15 ACR1800G
BCS618G
BCL14181H
BCL14183H
BCL1418IV*
* for vehicles with 12V DC outlets
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
Leak at nozzle or threaded hole Nozzles were installed improperly.
Nozzles clogged or dirty.
Reinstall nozzles and tighten securely.
Clean nozzles.
Fan will not start Battery is defective or fully discharged. Charge battery or contact customer service.