This document describes the RYOBI R18XBLW30 Cordless Blower, a battery-powered tool designed for outdoor use in dry and well-illuminated conditions. It is intended for blowing light debris such as leaves, grass, and other garden refuse.
Function Description
The RYOBI R18XBLW30 is a cordless blower that operates on an 18V d.c. battery system. Its primary function is to generate a high-velocity air stream to move light debris. The blower features a brushless motor (ONE HP BRUSHLESS SERIES) for enhanced performance and durability. It is designed for ease of use with a handle for comfortable grip and controls for adjusting air speed.
Important Technical Specifications
- Model: R18XBLW30
- Rated Voltage: 18 V d.c.
- Rated Current: 25.5 A
- Air Velocity (with nozzle): 315 km/h
- Air Velocity (without nozzle): 270 km/h
- Air Volume (with nozzle): 3.0 m³/min (102 CFM)
- Air Volume (without nozzle): 5.0 m³/min (170 CFM)
- Weight (without battery): 1.77 kg
- Weight (with heaviest battery): 2.96 kg
- Vibration Level (ah): 3.3 m/s² (K: 1.5 m/s²)
- Noise Emission (A-weighted sound pressure level at operator's position Lpa): 80.7 dB(A) (K: 3.0 dB)
- Guaranteed Sound Power Level (Lwa): 98 dB(A) (Measured Lwa: 94.6 dB(A), Kwa: 3.0 dB)
- Compatible Battery Packs: RB18L13, RB18L13Z, RB18L15, RB18L15A, RB18L15B, RB18L20, RB18L20A, RB18L25, RB18L25A, RB18L30, RB18L30A, RB18L40, RB18L40A, RB18L50, RB18L50A, RB18L60, RB18L60A, RB18L90, RB18L90A, RB1815C, RB1820C, RB1825C, RB1840C, RB1840X, RB1850C, RB1850X, RB1860X.
- Charger: RC18120 (for RB1860X battery pack)
- Accessory: Speed nozzle (RBLW1)
Usage Features
The blower is designed for straightforward operation with several user-friendly features:
- Assembly: The lower blower tube connects to the main unit and snaps into place with a tube latch.
- Battery Insertion: Battery packs are inserted into the product until the latches click, ensuring a secure attachment.
- Power and Speed Control: The device is turned on by pressing the power button. It features "Speed up" and "Speed down" buttons to adjust the air velocity. Pressing and holding the power button decreases the speed.
- Recommended Operating Position: The product should be operated in a recommended position, holding it by the designated handle. Users are advised to use the lowest speed necessary for the task.
- Safety Precautions:
- Always wear full eye and ear protection, substantial footwear, and long trousers.
- Do not operate barefoot or with open sandals.
- Keep hands and feet out of openings while the product is running.
- Maintain a safe distance of at least 15 m from bystanders, children, and pets to avoid injury from thrown or flying objects.
- Ensure the lower blower tube is connected at all times during operation.
- Do not place objects inside the blower tubes or place the product on or near loose debris, as this can lead to damage.
- Avoid using the product in bad weather, especially with a risk of lightning.
- Operate only during reasonable hours to avoid disturbing others.
- Never operate in an explosive atmosphere or in poor lighting.
- Always be sure of footing on slopes; walk, do not run.
- Do not overreach to maintain balance.
- Never use with defective guards, shields, or without safety devices.
- Turn off the product and remove the battery pack before leaving unattended, clearing blockages, checking/cleaning/working on the product, inspecting after striking a foreign object, or if it vibrates abnormally.
- Immediately turn off and remove the battery pack in case of accident or breakdown.
- Do not modify the product or use unapproved parts/accessories.
- If dropped or heavily impacted, stop, inspect for damage, and have it repaired by an authorized service center.
- If supplied with a harness, adjust it carefully and practice using the quick-release mechanism.
Maintenance Features
Proper maintenance is crucial for the product's safety, performance, and dependability:
- Cleaning:
- Before cleaning, turn off the product and remove the battery pack.
- Press the latch on each side to remove the battery pack.
- Clean the product with a stiff brush, removing all foreign materials.
- WARNING: Do not use water to clean the product.
- Blockage Clearing:
- Turn off the product, remove the battery pack, and ensure all moving parts have stopped.
- Remove the blower tubes to inspect for and clear any blockages.
- Reinstall the blower tubes before restarting.
- General Maintenance:
- Use only original manufacturer's replacement parts, accessories, and attachments.
- Servicing should be performed by a qualified service technician at an authorized service center.
- Regularly check all nuts, bolts, and screws for proper tightness.
- Replace worn or damaged components in sets to preserve balance.
- Replace damaged or unreadable labels.
- Clean the product with a soft, dry cloth after each use.
- Contact an authorized service center for repairs beyond those described in the manual.
Storage and Transportation
- Storage:
- Turn off the product, remove the battery pack, and allow it to cool down.
- Remove all foreign materials.
- Store in a cool, dry, well-ventilated place, inaccessible to children.
- Keep away from corrosive agents (e.g., garden chemicals, de-icing salts).
- Do not store outdoors.
- Transportation:
- Secure the product in a vehicle to prevent movement or falling.
- Transport lithium batteries according to local and national provisions and regulations.
- Follow special requirements for packaging and labeling when transporting batteries by a third party.
- Protect exposed connectors with insulating caps or tape.
- Do not transport cracked or leaking batteries.
- Consult the forwarding company for further advice on battery transportation.
Need help?
To Next Page
General
