Ryobi R18XPWS10 - Page 8

8
Getting started
Wear full eye and ear protection,
substantial footwear, and long trousers
at all times while operating the product.
Do not operate the product when
barefoot or wearing open sandals.
Connect the threaded end of the metal
wand to the power washer assembly.
Turn the wand clockwise to secure it
in place.
Insert the end of the 3-n-1 nozzle into
the connector end of the extension
wand and push until it clicks into place.
Press the lock-out button to unlock the
product.
Squeeze the switch trigger to operate
the product.
When using a water container, place
the other end of the hose with the floater
and filter into the water container.
NOTE: The maximum suction height
for the siphon hose is 1.8 m.
Flip the latch clip upward and press
down the latch to secure the battery
compartment cover in place.
1
2
1
2
3
1
8
5a
2
5b
9
3
10
When using tap water, remove the filter
and floater, then connect the hose to
the tap water.
NOTE: The water source can either be
a water container or tap water.