BATTERY PACK LED INDICATION DESCRIPTIONS
Status
O O O Flashing Charging: The battery pack capacity is lower than 25%.
O O Flashing On Charging: The battery pack capacity is between 25% and 50%.
O Flashing On On Charging: The battery pack capacity is between 50% and 75%.
Flashing On On On Charging: The battery pack capacity is between 75% and 100%.
On On On On Fully charged
O O O O
One minute after full charge, all LEDs on the battery are o, charger
LED is on with green color.
Flashing O O Flashing
Over temperature protection; remove the battery and allow it to cool
down.
O Flashing Flashing O
Overload protection; release and pull the trigger or remove and
reinstall the battery pack to reset the tool.
If your battery shows any LED sequence other than what is in the table, contact RYOBI online at Ryobi.com.au for Australia
or Ryobi.co.nz for New Zealand.
To Next Page
Loading...
Need help?
General
