Need help?Do you have a question about the Ryobi R4SDC and is the answer not in the manual?
General| Voltage | 4V |
|---|---|
| Chuck Size | 1/4 inch |
| Chuck Type | Hex |
| Speed | 200 RPM |
| Battery Type | Lithium-ion |
| Type | Screwdriver |
Defines the screwdriver's intended use for fastening/removing screws by adults.
Guidelines for clean, lit areas and avoiding explosive atmospheres during operation.
Precautions for safe electrical connections and handling to prevent shock.
Stresses operator alertness, avoiding impairment, and using good judgment.
Recommends wearing safety glasses and other protective gear to prevent injuries.
Instructions to ensure the tool is off before connecting power or picking it up.
Advice on balance, footing, and avoiding loose clothing or jewelry near moving parts.
Guidelines on not forcing the tool, using correct tools, and ensuring switch functionality.
Instructions for using specified chargers, compatible batteries, and safe handling.
Warnings against damaged batteries, fire exposure, and charging outside temperature limits.
Recommends servicing by qualified personnel using identical replacement parts.
Hold tool by insulated surfaces to avoid shock from hidden wires.
Specifies operating and storage temperature ranges for the tool.
Guidelines for safe charger use, avoiding wet conditions, and careful cord handling.
Do not use or disassemble damaged chargers; seek authorized service.
Unplug for maintenance; disconnect when not in use to prevent hazards.
Advices against household disposal; promotes recycling of waste electrical products.
Never charge damaged packs; observe ambient temperature limits for use and storage.
Product not for persons with reduced capabilities without supervision; supervise children.
Warns against fluid immersion, as conductive fluids can cause short circuits.
Highlights risks of hearing damage from noise and eye injury from dust; recommends protection.
Notes potential injury from vibration and advises wearing protective gear.
Discusses Raynaud's Syndrome from vibration and suggests staying warm and taking breaks.
Warns that extended use can cause or worsen injuries; recommends regular breaks.
Warns about respiratory injury from dust and recommends wearing a dust mask.
Do not connect to power during maintenance; use identical replacement parts.
Avoid solvents on plastic parts; use clean cloths and keep away from chemicals.
Recommends authorized service centres for all repairs to ensure safety.
States bearings are pre-lubricated for life span; no further lubrication is needed.
Advises against household disposal; promotes recycling of waste electrical products.
Explains signal words (Danger, Warning, Caution) and their associated risk levels.
Lists and labels the main parts of the 4V Screwdriver and its accessories.
Details model, voltage, chuck, speed, torque, weight, and charger/battery information.
Provides measured sound and vibration emission values according to EN 62841 standards.
Lists available replacement parts with their corresponding part numbers.
To Next Page
