To Next PageTo Next Page
Need help?Do you have a question about the Ryobi HP37 and is the answer not in the manual?
General| Voltage | 4V |
|---|---|
| Speed | 200 RPM |
| Battery Type | Lithium-Ion |
| Chuck Type | 1/4 in. Hex |
| Torque | 44 in-lbs |
| Max Torque | 44 in-lbs |
Details the policy for exchanging defective Ryobi power tools within the first 30 days of purchase.
Outlines defects in workmanship or materials covered for two years, with 90 days for accessories and two years for batteries.
Provides instructions on returning the power tool to an Authorized Service Center for repair or replacement.
Lists exclusions from the warranty, such as misuse, abuse, neglect, or unauthorized repairs.
Explains limitations on implied warranties and responsibilities for damages, varying by state law.
Emphasizes keeping the work area clean, well-lit, and free from distractions or explosive atmospheres.
Advises on using the correct charger for battery-operated tools and specific battery packs to prevent fire risks.
Highlights staying alert, dressing properly, avoiding accidental starts, and maintaining balance for safe operation.
Covers securing workpieces, not forcing the tool, checking for damage, and proper maintenance for safe operation.
Encourages understanding the product and manual for safe operation and familiarization with features.
Explains the rocker switch for ON/OFF and forward/reverse control of the screwdriver.
Describes the screwdriver's ability to convert between stick and pistol configurations.
Details the 22-position clutch for selecting appropriate torque levels for different applications.
Highlights the convenience of the integrated light for working in low-light or tight areas.
Guides on carefully removing the product, checking for damage, and verifying all items in the packing list.
Lists the items included in the product package, such as the screwdriver, charger, and accessories.
Lists the intended uses of the screwdriver, including driving screws and light-duty drilling.
Provides instructions for charging the tool overnight before first use and notes on battery charging cycles.
Details how to charge the screwdriver directly using the charger plug and power supply.
Explains how to mount the charging stand to a wall or place it on a surface for charging.
Guides on placing the screwdriver in the charging stand and connecting to power for charging.
Describes how to switch between stick and pistol modes using the rotation button.
Explains the collet's compatibility with 1/4 in. hex bits and how to insert them securely.
Details how to operate the built-in light using a slide switch for improved visibility.
Explains the function of the adjustable torque clutch for driving screws into various materials.
Guides on rotating the adjustment ring to select one of the twenty-two torque settings.
Describes how to use the switch to drive screws or remove them by depressing different parts of the switch.
Advises on cleaning tools with clean cloths and avoiding solvents that can damage plastic parts.
Details how to remove battery packs, disconnect leads, and the importance of recycling Ni-Cd batteries.
Provides instructions for replacing the screwdriver's bulb, including part number and removal/installation steps.
Guides on purchasing replacement parts online or via phone and at authorized service centers.
Explains how to find authorized service centers online or by calling customer support.
Provides contact information for obtaining customer or technical assistance for the product.
