Ryobi HP24 User Manual

THANK YOU FOR BUYING A RYOBI SCREWDRIVER.
Your new screwdriver has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
CAUTION: Carefully read through this entire operator’s manual before using your new screwdriver.
Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your screwdriver properly and only
for what it is intended, you will enjoy years of safe, reliable service.
Thank you again for buying Ryobi products.
OPERATOR'S MANUAL
2.4 VOLT SCREWDRIVER
Model HP24
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Collet 1/4 in. (6.4 mm)
Motor 2.4 Volt DC
Switch Single Speed / Reversible
No Load Speed 150 RPM
Maximum Torque 35 lb.- in.
Charger Rating 120 Volts, 60 Hz, AC only
Charger Voltage 2.4 Volt
Charger Rate 3-6 Hours
14
14
16
16
18
18
20
20

Ryobi HP24 Specifications

General

Brand	Ryobi
Model	HP24
Category	Power Screwdriver
Language	English

Summary

General Safety Rules

Work Area Safety

Guidelines for maintaining a safe and clear workspace to prevent accidents.

Electrical Safety Precautions

Essential precautions to prevent electric shock and fire hazards related to power tools.

Personal Safety Guidelines

Key measures for operator well-being, including alertness, attire, and avoiding hazards.

Tool Use and Care

Instructions for proper usage and maintenance to ensure tool longevity and safety.

Specific Safety Rules

Safe Operation Rules

Further safety advice for operating the screwdriver, focusing on specific scenarios.

Battery Tool Safety

Critical safety considerations unique to battery-powered tools and their operation.

Important Safety Instructions For Charger

Symbols

Features

Know Your Screwdriver

An introduction to the screwdriver's components and essential operating features.

Switch Operation

Details on using the rocker switch for power control and forward/reverse functionality.

Operation

Charging Your Screwdriver

Procedure and guidelines for charging the screwdriver's battery before initial use.

Collet and Bit Insertion

Instructions for inserting the screwdriver bit into the collet correctly.

Adjustable Torque Clutch

How to adjust the torque setting for optimal screw driving and preventing damage.

Maintenance

Battery Removal

Battery Removal and Recycling

Step-by-step guide for safely removing and preparing batteries for proper disposal.

Battery Care and Life

Recommendations for maximizing battery performance and lifespan through correct storage and charging.

Service and Parts

Model and Serial Number

Guidance on locating and recording the tool's model and serial numbers for service.

Ordering Repair Parts

Essential information required to accurately order replacement parts for the screwdriver.