EasyManua.ls Logo

Ryobi RBR180013 - Transportation and Storage; Maintenance; Transporting Lithium Batteries

Ryobi RBR180013
88 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6 | English
TRANSPORTATION AND
STORAGE
Turn off the product and allow
it to cool down before storing
or transporting. Do not store
or transport the product with
the batteries fitted. Remove
the batteries, and secure them
separately.
Clean all foreign material from the
product. Store the product in a cool,
dry, and well-ventilated place that
is inaccessible to children. Do not
store the product outdoors.
Store unused repellent mats in a
tightly closed container. Keep the
repellent mats in a cool, dry place
that is inaccessible to children.
Keep the mats away also from any
sources of ignition or heat.
TRANSPORTING LITHIUM
BA
TTERIES
Transport the battery pack in
accordance with local and national
provisions and regulations. Follow all
special requirements on packaging and
labelling when transporting batteries by
a third party.
Ensure that no batteries can come
in contact with other batteries or
conductive materials while in transport
by protecting exposed connectors with
insulating, non-conductive caps or
tape. Do not transport batteries that
are cracked or leaking. Check with the
forwarding company for further advice.
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories, and
attachments. Failure to do so can
cause possible injury, can contribute
to poor performance, and may void
your warranty.
WARNING
Servicing requires extreme care
and knowledge and should be
performed only by a quali ed
service technician. Have the product
serviced by an authorised service
centre only. When servicing, use
only original replacement parts.
Turn off the product and remove
the battery pack before conducting
any maintenance or cleaning work.
You may make adjustments and
repairs if described in this manual.
For other repairs, contact an
authorised service centre.
Before any maintenance or
adjustment, disable the product by
removing the power source.
Bring the product to an authorised
service centre to replace damaged
or unreadable labels.

Related product manuals