Ryobi RBV254O - Draining Fuel for Storage

38
STORAGE
1
2
1
2
1
2
3
A4
B1
B2
1
2
3
4
5
2
A4. Unzip the vacuum bag. Push the vacuum
bag adaptor towards the opening.
B1.To remove the leaf or sweeper nozzle,
twist and remove the nozzle from the
upper blower tube.
B2.Press on the raised locking tab, twist the
blower tube counterclockwise, and then
detach the upper blower tube from the
housing outlet.
2. Loosen the fuel cap slowly by turning
counterclockwise, and then drain all fuel
from the tank into a container approved
for fuel. After draining all the fuel, replace
the fuel cap and tighten by turning it
clockwise.