Ryobi RBV26G - Page 3

spark and/or ame-producing equipment.
Store fuel in containers specically designed for this
purpose.
Only refuel outdoors and do not smoke while refueling.
Add fuel before starting the engine. Never remove the cap
of the fuel tank or add fuel while the engine is running or
when the engine is hot.

Do not smoke while handling fuel.

Mix and store fuel in a container approved for petrol.

Mix fuel outdoors where there are no sparks or ames.

Loosen fuel cap slowly to release pressure and to keep
fuel from escaping around the cap.

Tighten the fuel cap securely after refueling.

Wipe spilled fuel from the unit. Move 10m away from
refueling site before starting engine.

Never attempt to burn off spilled fuel under any
circumstances.

To reduce the risk of re and burn injury, handle fuel with
care. It is highly ammable.
If fuel is spilled, do not attempt to start the engine but
move the machine away from the area of spillage and
avoid creating any source of ignition until fuel vapors have
dissipated.
Replace all fuel tank and container caps securely.

Empty fuel tank into a container approved for petrol and
restrain the unit from moving before transporting in a
vehicle.
When draining the fuel tank, use an approved fuel storage
container in a well-ventilated area.

Select bare ground, stop engine, and allow unit to cool
before refueling.

Save these instructions. Refer to them frequently and use
them to instruct others who may use this tool. If you loan
someone this tool, loan them these instructions also.