Need help?Do you have a question about the Ryobi RCD1802 and is the answer not in the manual?
Keep work area clean and well lit, avoid explosive atmospheres, and keep bystanders away.
Use correct plugs, avoid grounded surfaces, protect from rain/wet, do not abuse cord, use suitable outdoor extension cords, use RCD.
Stay alert, use PPE, prevent unintentional starting, remove adjusting keys, maintain balance, dress properly, use dust extraction.
Use correct tool, ensure switch functionality, disconnect power for adjustments, store safely, maintain tool, keep cutting tools sharp.
Not for persons with reduced capabilities unless supervised; children must be supervised.
Wear ear protectors when drilling to prevent hearing loss.
Use auxiliary handles if supplied for better control.
Hold tool by insulated surfaces when contact with hidden wiring is possible.
Drilling in wood, ceramics, plastics, fiberglass, laminates, and metals.
Suitable for mixing paint.
Use only identical Ryobi replacement parts to avoid hazards.
Avoid solvents on plastic parts; use clean cloths for dirt and grease.
Do not modify the tool or create unrecommended accessories.
Recycle raw materials instead of disposing as waste.
Indicates important safety information; read instructions before use.
Do not dispose of with household waste; recycle where possible.
Instructions on opening and closing the chuck for bit insertion.
How to insert drill bits into the chuck.
Specifies the tool's voltage (18V).
Indicates the chuck capacity (2-13 mm).
Notes the variable speed switch.
Provides lo speed (0-440 min-1) and hi speed (0-1600 min-1) ranges.
Lists the number of clutch positions (24).
States the maximum torque output (45 Nm).
Specifies the maximum spade bit size (38 mm).
Indicates the weight excluding the battery pack (1.21 kg).
Lists compatible Lithium-Ion battery models.
Lists compatible Lithium-Ion charger models.
Lists compatible Nickel Cadmium battery models.
Lists compatible Nickel Cadmium charger models.
To Next Page
General
