To Next PageTo Next Page
Need help?Do you have a question about the Ryobi RCD12011L and is the answer not in the manual?
Hold power tool by insulated surfaces when cutting accessory might contact hidden wiring.
Never operate at higher speed than the maximum speed rating of the drill bit.
Clamp workpiece with a clamping device for safety.
Hold power tool by insulated surfaces when cutting accessory might contact hidden wiring.
Never operate at higher speed than the maximum speed rating of the drill bit.
Clamp workpiece with a clamping device for safety.
General| Soft grip | Yes |
|---|---|
| Chuck type | Keyless |
| Product design | Pistol grip drill |
| Torque settings | 22 |
| Idle speed (1st gear) | 715 RPM |
| Drilling diameter in wood (max) | 25 mm |
| Drilling diameter in steel (max) | 10 mm |
| Maximum torque (hard applications) | 25 N⋅m |
| Product color | Black, Yellow |
| Power source | Battery |
| Charging time | 60 min |
| Battery voltage | 12 V |
| Battery capacity | 1.3 Ah |
Weight and Dimensions| Weight | 1070 g |
|---|
