Need help?Do you have a question about the Ryobi RPD18X and is the answer not in the manual?
General| Type | Cordless Drill |
|---|---|
| Voltage | 18 V |
| Speed Settings | 2 |
| Torque settings | 24 |
| Chuck Size | 13 mm |
| Chuck Capacity | 1.5 - 13 mm |
| Max. drilling diameter in steel | 13 mm |
| Max. drilling diameter in wood | 50 mm |
| Battery Type | Lithium-Ion |
Ensure proper plugs, avoid body contact with earthed surfaces, protect from water, and do not abuse the cord.
Ensure the switch is off before connecting power or battery pack.
Disconnect power before making adjustments, changing accessories, or storing the tool.
Recharge battery packs only with the manufacturer-specified charger to prevent fire risk.
Use power tools only with specifically designated battery packs to avoid injury and fire risk.
Do not use damaged or modified battery packs as they may cause fire or explosion.
Do not expose battery packs or tools to fire or temperatures above 130°C to prevent explosion.
Follow all charging instructions and charge within specified temperature ranges to prevent damage and fire.
Have power tools serviced by qualified personnel using identical replacement parts for safety.
Service damaged battery packs only through the manufacturer or authorized service providers.
Wear ear protectors and use the auxiliary handle for safety during operation.
Follow safety guidelines when using long drill bits to prevent bending and injury.
Never operate at a higher speed than the drill bit's maximum rating to prevent bending and injury.
Switch off immediately if the bit stalls and do not restart until the cause is found and rectified.
To Next Page
