Need help?Do you have a question about the Ryobi RPD1010 and is the answer not in the manual?
General| Type | Corded Drill |
|---|---|
| Chuck Size | 13 mm |
| Speed | Variable |
| No Load Speed | 0-3000 rpm |
| Drilling Capacity in Steel | 13 mm |
| Voltage | 230V |
Crucial safety advice applicable to all power tools.
Keep work area clean, avoid explosive atmospheres, keep children away.
Proper plug usage, avoid earthed surfaces, protect from rain/wet, don't abuse cord, use outdoor cords, use RCD in damp locations.
Stay alert, use PPE, prevent unintentional starting, remove keys, don't overreach, dress properly, use dust extraction.
Use correct tool, check switch, disconnect power before adjustments, store properly, maintain tool.
Specific safety precautions for using drills.
Hold by insulated surfaces to avoid shock from hidden wires.
Wear safety goggles to protect eyes from flying particles.
Instructions for inserting and securing drill bits.
Select drill mode for wood/metal, hammer mode for masonry.
Guidance on performing drilling tasks.
Use drill mode for wood and metal, ensuring proper bit selection.
Use impact mode for masonry, ensuring correct bit and mode selection.
Key technical parameters of the percussion drill.
Details on model, voltage, input power, speed, and capacity.
Maximum drilling depths in wood, metal, masonry, and tool weight.
Measured vibration values and guidance on exposure assessment.
To Next Page
