To Next PageTo Next Page
Need help?Do you have a question about the Ryobi RE180PL1G and is the answer not in the manual?
General| Power Source | Corded Electric |
|---|---|
| Motor Power | 1800 W |
| Voltage | 230 V |
| Speed | Variable |
| Base Type | Plunge |
| Soft Start | Yes |
| Collet Size | 6mm |
| Plunge Depth | 55mm |
General safety guidelines for the work environment.
Safety precautions related to the tool's electrical components and power source.
Guidelines for user's personal safety and well-being during operation.
Instructions for safe and effective operation and maintenance of the power tool.
Procedures and requirements for servicing the power tool.
Essential safety guidelines for operating the router.
Explains the meaning of signal words like DANGER, WARNING, CAUTION, NOTICE.
Defines symbols used on the product and their meanings for safe operation.
Explanation of the double insulation safety feature and its implications.
Details on connecting the tool to the appropriate power supply.
Guidelines for selecting and using extension cords with the power tool.
Lists technical specifications of the plunge base router.
Critical safety warnings related to product assembly and parts.
Information on chemical exposure risks as required by California law.
Key safety warnings and advice for operating the router.
Lists the intended uses and applications for the plunge base router.
Step-by-step instructions for inserting and removing router bits.
Guide for installing and removing the 1/4 inch adaptor for smaller bits.
Factors influencing the choice of depth of cut for routing.
Detailed steps for adjusting the router's depth of cut.
Explanation and use of the zero reset indicator for depth settings.
Instructions for using the Accu-Stop for precise depth adjustments.
Information on the router's soft start switch and operation.
How to use the speed selector for optimal cutting performance.
Recommended speed settings based on material and bit size.
Techniques for routing straight cuts and grooves using guides.
Steps for performing internal routing operations safely and effectively.
Procedure for routing along the edge of a workpiece using a guide.
Techniques and tips for performing freehand routing tasks.
Using bits with pilots for edge shaping and guidance.
How feed direction affects router control and cut quality.
Factors determining the correct feed rate for optimal routing.
Consequences and indicators of feeding the router too quickly.
Consequences and indicators of feeding the router too slowly.
How depth of cut impacts feed rate, cut quality, and tool longevity.
Instructions for mounting the router to a router table.
How to adjust the plunge lock lever for proper operation.
Information on replacing the power supply cord.
How to clean router bits for better performance.
Steps for cleaning the router collet and collet nut.
How to check and replace brush assemblies.
