Need help?Do you have a question about the Ryobi RHT6060 and is the answer not in the manual?
Keep work area clean, avoid explosive atmospheres, and keep bystanders away.
Use correct plugs, avoid earthed contact, protect from rain/wet, and handle cords safely.
Stay alert, use PPE, prevent unintentional starting, maintain balance, and dress properly.
Use correct tool, ensure switch works, disconnect before maintenance, and store properly.
Have your power tool serviced by a qualified person using identical replacement parts.
Keep body from blades, avoid cord damage, use blade cover for transport, and keep cable away from cutting.
Clear area, use caution near objects, ensure good lighting, wear PPE, and maintain proper footing.
The product has an overload protection device that automatically shuts down power when overheating or current spike occurs.
Disconnect power, clean product, cover blade, and store in a cool, dry, well-ventilated place.
Clean after use, lubricate blades, check fasteners, and use only original parts for repairs.
Risks include blade contact, vibration, and noise; take precautions to minimize them.
Take measures against vibration (warmth, breaks) and noise (ear protection) to reduce health risks.
Lists the items included with the hedge trimmer: trimmer, HEDGESWEEPTM, blade sheath, manual.
Explains safety alert, PPE, and operational symbols found on the product and within the manual.
Defines signal words DANGER, WARNING, CAUTION, and CAUTION (no symbol) indicating risk levels and potential outcomes.
Identifies and labels the main parts and accessories of the hedge trimmer.
Wear safety gear, attach HEDGESWEEPTM, connect power, and hold/trigger to operate.
Secure the power cable by hanging it onto and pulling it into the cable retainer.
Visual overview of operating, rotating handle, cleaning, and storing the hedge trimmer.
Always use two hands and keep them away from the blades. Secure the cable.
Connect to power outlet, use both triggers, and apply a slow, sweeping action.
Pull the rotation trigger and turn the handle to 45° or 90° for trimming sides from bottom to top.
Disconnect power, clean body/handles with a soft cloth, and brush debris from blades.
Clean foreign materials, cover blade with sheath, and store in a cool, dry, ventilated place away from ignition.
Lists model, power, voltage, speed, blade length, cutting capacity, weight, vibration, and noise levels.
To Next Page
General
