What to do if my Ryobi RHT2660DAG engine starts but will not accelerate?
If your Ryobi Trimmer engine starts but will not accelerate, allow the engine to completely warm up for approximately three minutes. If the engine does not accelerate after three minutes, contact a servicing dealer.
What to do if my Ryobi RHT2660DAG Trimmer starts but will not idle?
If your Ryobi Trimmer engine starts, runs, and accelerates but will not idle, it might be due to the idle speed screw on the carburetor needing adjustment. Turn the idle speed screw clockwise to increase the idle speed. The blades should not move at idle.
Why does my Ryobi RHT2660DAG engine not reach full speed and emit excessive smoke?
If your Ryobi Trimmer engine does not reach full speed and emits excessive smoke, check the lubricant fuel mixture. Use fresh fuel and the correct 2-stroke lubricant mix. Also, the air filter screen might be dirty, so clean it. For a dirty spark arrester screen, contact a servicing dealer.
What to do if my Ryobi RHT2660DAG engine will not start?
If your Ryobi Trimmer engine won't start, there could be several reasons. It might be due to no spark. Try cleaning or replacing the spark plug and resetting the spark plug gap. Another reason could be no fuel. Push the primer bulb until it's full of fuel. If it doesn't fill, the primary fuel delivery system might be blocked, and you should contact a servicing dealer. Alternatively, the engine could be flooded. Remove the spark plug, turn the trimmer to aim the spark plug hole at the ground, adjust the choke lever to the 'RUN' position, and pull the starter cord 10-15 times to clear excess fuel. Clean and reinstall the spark plug. Clean up any spilled fuel and move at least 9m away before restarting. Pull the starter cord 3 times with the choke lever at the 'RUN' position. If it doesn't st...
Describes the product's intended use for cutting hedges and shrubs outdoors.
Introduces the user to the parts and operation of the hedge trimmer.
Explains the function of the safety guard.
Describes the adjustable rotating handle feature.
Explains the purpose of the blade sheath.
Details the function of the trigger lock mechanism.
Steps to carefully remove and check the product and accessories from the box.
Lists the items included in the product package.
Instructions on how to correctly mix fuel and oil for the hedge trimmer.
Step-by-step guide and ratio for preparing the fuel-oil mixture.
Step-by-step guide for starting the engine when it is cold.
Step-by-step guide for starting the engine when it is warm.
How to safely turn off the hedge trimmer engine.
How to quickly stop the engine in an emergency situation.
Ensure the work area is clear of objects before trimming.
Do not force the trimmer; adjust pace if blades slow down.
Do not cut stems larger than 28mm; use other tools for thicker stems.
Steps to take if the cutting blades become obstructed.
Technique using a string line for level hedge trimming.
Information on vibration effects and measures to reduce them.
Advice on cleaning the trimmer and avoiding damaging solvents.
Safety precautions when handling sharp hedge trimmer blades.
Specific instructions for draining fuel when storing for extended periods.
Troubleshooting steps for when the engine fails to start.
Diagnosing and fixing acceleration issues.
Addressing issues with engine speed and choke operation.
Troubleshooting excessive smoke and lack of full speed.
Resolving problems with the engine's idling function.
To Next Page
General
