6
TRIGGER
LOCK
THROTTLE
TRIGGER
FRONT
HANDLE
GUARD
ROTATING
HANDLE
BLADES
ON/OFF
SWITCH
STARTER
GRIP
SHEATH
See Figure 1.
The safe use of this product requires an understanding of the
information on the tool and in this operator’s manual as well
as a knowledge of the project you are attempting. Before use
of this product, familiarise yourself with all operating features
and safety rules.
The guard helps to deect chips or other debris away from
the operator’s hands and keeps ngers away from the blades.
The handle can be rotated to lock at either side in 45° or 90°
angles for ease of use when trimming. This is a handy feature
when trimming vertically or along the sides of shrubbery.
The sheath keeps the operator from coming in contact with
the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage Never start or operate the product with the
sheath in place.
The trigger lock prevents unintentional starting of the hedge
trimmer blades.
Engine Displacement ................................................. 26 cc
Max Engine Performance (in Accordance with ISO 8893) ..
................................................................................0.67 kW
Fuel Consumption (in Accordance with ISO 8893) at Max
Engine Performance ...............................................0.51 L/h
Specic Fuel Consumption (in Accordance with ISO 8893)
at Max Engine Performance .............................0.76 L/kW.h
Fuel Tank Capacity ....................................................0.25 L
Blade Type ........................................... Dual Reciprocating
Cutting Length ...........................................................60 cm
Max Cutting Capacity ...............................................28 mm
Dry Weight ............................................................... 5.06 kg
Vibration Level (in accordance with Annex C of EN ISO
10517)
-Front Handle...................
=5.18 m/s
2
=15.18 m/s
2
ahv, eq = 13.77 m/s
2
K=1.5 m/s
2
-Rear Handle .................... =4.16 m/s
2
=15.16 m/s
2
ahv, eq =13.69 m/s
2
K=1.5 m/s
2
Sound Pressure Level at Operator Position (LpA)
(EN ISO 10517, EN ISO 11201, EN ISO 3744)
Idling ..................................................83.4 dB(A) K=3dB(A)
Racing .............................................107.2 dB(A) K=3dB(A)
Sound Power Measurements (in accordance with Annex D
of EN ISO 10517, EN ISO 3744) .............. =71.4 dB(A)
=89.2dB(A) LpA,eq=88.2dB(A)
LWA,eq=108.2dB(A) K=3dB(A)
Measured Sound Power Level (in accordance with EN ISO
3744:1995 and ISO 11094:1991) ....................112.1 dB (A)
Guaranteed Sound Power Level ........................113 dB (A)
Fig. 1
To Next Page
