5
Lubricant Use synthetic 2-stroke lubricant for air cooled engines.
Mix Petrol and Lubricant
Mix the fuel mix thoroughly and also each time before
refuelling.
Switch
On/Off Switch
I = ON to Run
O = OFF to Stop
Wet Conditions Alert Do not use in rain or wet conditions.
Servicing requires extreme care and knowledge and should
be performed only by a qualied service technician. For
service we suggest you return the product to the nearest
for repair. When servicing,
use only identical replacement parts.
The following signal words and meanings are intended to explain the levels of risk associated with this product.
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may result
in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
To avoid serious personal injury, do not attempt
to use this product until you read thoroughly and
understand completely the operator’s manual. If you
do not understand the warnings and instructions in the
operator’s manual, do not use this product. Call Ryobi
customer service for assistance.
The operation of any power tool can result in foreign
objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool
operation, always wear safety goggles or safety
glasses with side shields and, when needed, a full face
shield. We recommend Wide Vision Safety Mask for
use over eyeglasses or standard safety glasses with
side shields.
To Next Page
