EasyManua.ls Logo

Ryobi RIG2000PC - Symbols and Signal Words; Safety Symbols and Explanations; Signal Words and Meanings

Ryobi RIG2000PC
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
or oil.
Do not remove the oil dipstick or the fuel tank cap
when the engine is running.
Pay close attention to all safety labels located on the
generator.
Keep children a minimum of 3 m away from the
generator at all times.
The product operates best in temperatures between
-5°C and 40°C with a relative humidity of 90% or
less.
Operating voltage and frequency requirement of
all electronic equipment should be checked prior
to plugging them into this generator. Damage may
result if the equipment is not designed to operate
within a ±10% voltage variation, and ±3 Hz frequency
variation from the generator name plate ratings.
The product is for outdoor use only.
Operation of the generator at altitudes above
1,000 m may require retuning. Consult a qualified
service technician.
When using extension lines or mobile distribution
networks the total length of lines for a cross section
of 1.5 mm
2
should not exceed 60 m; for a cross
section of 2.5 mm
2
this should not exceed 100 m.
The generating set must not be connected to other
power sources except another RIG2000PC with the
RIGPC1000 Parallel Cable (sold separately).
Save these instructions. Refer to them frequently and
use them to instruct others who may use this tool. If you
loan someone this tool, loan them these instructions
also.

Other manuals for Ryobi RIG2000PC

Related product manuals