Ryobi RLT183113 - Line Trimmer Safety Warnings; Safe Operation Guidelines; Tool Handling and Protection; Equipment Checks and Modifications

3 English |
EN
FR
DE
ES
IT
NL
PT
DA
SV
FI
NO
RU
PL
CS
HU
RO
LV
LT
ET
HR
SL
SK
BG
Ŷ Keep the head attachment below waist
level.
Ŷ Never operate the product with damaged
guards or without guards in place.
Ŷ Never fit a metal replacement line.
Ŷ Keep hands and feet away from the cutting
means at all times and especially when
switching on the motor.
Ŷ Beware, the cutting elements continue to
rotate after the motor is switched off.
Ŷ %HZDUH RI REMHFWV WKURZQ E\ WKH FXWWLQJ
means. Clear debris like small stones,
JUDYHO DQG RWKHU IRUHLJQ REMHFWV IURP WKH
work area before starting operation. Wires
or string may become entangled with the
cutting means.
Ŷ Switch off and remove battery pack before:
Ɣ servicing
Ɣ leaving the product unattended
Ɣ cleaning your product
Ɣ changing accessories
Ɣ checking for any damage after hitting an
REMHFW
Ɣ checking for any damage if the product
starts to vibrate abnormally
Ɣ performing maintenance
Ŷ Wear full eye and hearing protection while
operating the product. If working in an area
ZKHUHWKHUHLVDULVNRIIDOOLQJREMHFWVKHDG
protection must be worn.
Ŷ Hearing protection may restrict the
operators ability to hear warning sounds,
pay particular attention to potential hazards
around and inside the working area.
Ŷ Wear heavy long trousers, boots, and
gloves. Do not wear loose fitting clothing,
VKRUWWURXVHUVMHZHOOHU\RIDQ\NLQGRUXVH
with bare feet.
Ŷ Secure long hair so it is above shoulder
level to prevent entanglement in moving
parts.
Ŷ The small blade fitted to the lawn guard
is designed to trim the new extended line
to the correct length for safe and optimum
performance. It is very sharp, do not touch
it particularly when cleaning the tool.
Ŷ Always ensure that ventilation openings
are kept clear of debris.
Ŷ Before use and after any impact, check that
there are no damaged parts. A defective
switch or any part that is damaged should
be properly repaired or replaced by an
authorized service facility.
Ŷ Make sure the cutting head attachment is
properly installed and securely fastened.
Ŷ Make sure all guards, deflectors and
handles are properly and securely attached.
Ŷ Do not modify the machine in any way, this
PD\LQFUHDVHWKHULVNRILQMXU\WR\RXUVHOI
or others.
Ŷ Use only the manufacturer’s replacement
cutting line. Do not use any other cutting
attachment.
WARNING
Some regions have regulations that restrict
the use of the product to some operations.
Check with your local authority for advice.
WARNING
Ensure that the cut-off blade is properly
positioned and secured before each use.
TRANSPORTATION AND STORAGE
Ŷ
Stop the machine and allow it to cool before
storing or transporting. Do not store or
transport the machine with batteries fitted,
remove and secure separately
Ŷ Clean all foreign material from the product.
Store it in a cool dry and well-ventilated
place that is inaccessible to children. Keep
away from corrosive agents such as garden
chemicals and de-icing salts. Do not store
outdoors.
Ŷ For transportation, secure the machine
against movement or falling to prevent
LQMXU\WRSHUVRQVRUGDPDJHWRWKHPDFKLQH
MAINTENANCE
WARNING
Use only original manufacturer’s
replacement parts, accessories and
attachments. Failure to do so can cause
SRVVLEOHLQMXU\SRRUSHUIRUPDQFHDQGPD\
void your warranty.