8
1
1
2
Insert shaft
fully to
this line
65
2
Always wear safety goggles or safety glasses with side shields
when operating the product. Wear non-slip, heavy-duty protective
gloves. Wear non-skid, protective footwear that will protect your
feet and improve your footing on slippery surfaces.
Insert and tighten the lower shaft to the upper shaft.
NOTE: Insert the lower shaft up to the indicator line.
Insert the battery pack until the battery latch button clicks into
place. Push the lock-out trigger and squeeze the variable speed
trigger to operate the product.
Install the front handle onto the upper shaft.
To Next Page
