Ryobi RLT1833BL4 - Product Specifications; Vibration Level; Battery and Charger; Replacement Parts

PRODUCT SPECIFICATIONS
Cordless Line Trimmer / Edge Trimmer
Model RLT1833BL4 / OLT1833BL
Voltage 18 V
No-load speed
High speed 0–6200/min
Low speed 0–5200/min
Cutting capacity 28 cm / 33 cm
Cutting line diameter 2.0 mm
Weight without battery pack 3.3 kg
Weight with heaviest battery pack 4.5 kg
Cutting width 280/330 mm
Noise emission values determined according to IEC 60335-2-91
A-weighted sound pressure level L
pA
= 84.3 dB
Uncertainty K = 2.5 dB
A-weighted sound power level L
WA
= 95.7
Uncertainty K = 2.5 dB
Vibration total values determined according to IEC 60335-2-91
Vibration emission value
Front handle a
h
= 3.9 m/s²
Rear handle a
h
= 4.7 m/s²
Uncertainty K = 1.5 m/s²
BATTERY AND CHARGER
Model RLT1833BL4 OLT1833BL
Battery pack RB18L40 —
Charger RC18120 —
Compatible
battery packs
RB18L13, RB18L15, RB18L20, RB18L25,
RB18L26, RB18L40, RB18L20A, RB18L50,
RB18L60A, RB18L90A
Compatible
chargers
RC18120, BCL1418H, BCL14183H,
BCL1418IV*, RC18150U, BCS618G,
RC18627U, RC18115
*BCL1418IV is compatible for charging in vehicles with 12 V DC
outlets.
REPLACEMENT PARTS
Replacement head RAC1214
Replacement bump knob 530455007
Replacement 2.0 mm trimming line PWFTL2050T
VIBRATION LEVEL
WARNING
The declared vibration value has been measured with a
standard test method and may be used to compare one
tool with another.
The declared vibration value may be used in a
preliminary assessment of exposure.
The vibration emission during actual use of power tool
can differ from the declared total value depending on the
ways in which the tool is used.
Identify safety measures to protect yourself based on an
estimation of exposure in the actual conditions of use,
taking account of all parts of the operating cycle such
as the times when the tool is switched off and when it is
running idle in addition to the trigger time.